Table of Contents
Advertisement
3. Enter the
IP or Domain
) and
vbrickuser
4. Accept the default
This completes the Portal Server Configuration. However in order to verify the installation as
explained below, you must sync the VOD-W server with the ETV Portal server as follows:
To manually sync the VOD-W server with the ETV Portal Server
1. Launch the ETV Portal Server admin tool and go to
Assignments > Assign VOD Polling Interval
2. Click
Sync Now
Step 5. Verify the Installation
Use the following sequence of steps to verify the VOD-W server is installed properly and can
communicate with the ETV Portal Server. If you can use the ETV Portal Server to launch a
video stored on the VOD-W Server, you have tested connectivity and verified the installation.
For more information about ETV Portal Server, see the ETV Portal Server Admin Guide.
To verify the installation
1. Ping the IP address of the VOD-W server from any PC in the same network.
2. Launch an ETV Portal Server client. (Open a browser and enter the ETV Portal Server
hostname or IP address (e.g.
3. Go to
Browse Video Library
display in the preview window.
4. On the VOD-W server, go to
QVOD Server
5. In the navigation pane on the console, click on Sessions to view playback data for the
video you just launched. Important: You must view the Session Manager while playback
is in progress. If the video ends, no data will be shown.
6. Verify that the
the video. If the IP address matches and a
connectivity between the VOD-W server and the ETV Portal server.
VOD-W Admin Guide
,
Server Description
(default =
FTP Password
parameters and click
Publishing Point
. Do not change anything else and exit when done.
http://portalserveripaddr
and launch any video in the
Start > Program > QuickVideo OnDemand Server > Monitor
to launch the QVOD Server Console.
IP address matches the computer from which you launched
Host Name
(optional),
FTP User Name
).
vbrickuser
when done.
Add
Global Settings > Global
.
) in the address bar.
folder. The video should
Demo
is shown, you have verified
DataRate
Getting Started
(default =
11
Advertisement
Table of Contents
