Inserting The Filter - Swann Retro SK22110 Manual

INSERTING THE FILTER

To insert the selected filter in the porta-filter, make sure to align the notch on the
filter with the groove inside the porta-filter.
Turn the filter to the left or right to lock in place. This will help secure the filter in the
porta-filter. There are two coffee filters: shallow (single shot) and deep (double shot).
BEFORE THE FIRST USE
Remove all packaging. Make sure the steam knob is at 0 and the steam button,
pump control button and On/Off button are in the OFF (out) position.
To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker
with warm water as follows:
• Pull out the water tank of the coffee maker. Pour water into the tank. Do not fill
past the MAX level. Insert the tank back into the coffee maker.
• Set coffee filter into porta-filter (no coffee in coffee filter), then put the it into the
dock (see Fig.1), and turn it anti-clockwise until it is fixed tightly (see Fig.2 and
Fig.3).
fig.1
SK22110_IM.indd 9
HOW TO USE
fig.2
9
coffee filter
porta-filter
fig.3
19/06/2018 11:03