Automatic Power Off Function - Swann Retro SK22110 Manual

Table of Contents

Advertisement

Dip the steam wand into the liquid to be heated. If you want to froth milk, dip the
steam wand about 2 centimetres into the milk. Turn the steam knob in anti-
clockwise slowly to start making steam.
When you have finished turn the steam knob to the "O" position.
After you finish frothing milk each time, put an empty jug under the steam band,
then turn on the steam knob and press down the pump control button
the lower position. Let the pump operate for 30 seconds, then turn it off again.
Finally, clean the steam outlet with wet sponge, but care not to get burnt!
Press and release the ON/OFF button
Note: If the steam outlet becomes blocked: Turn the steam knob to "O" posi-
tion and allow the coffee maker cool down for about half an hour, then poke the
steam outlet several times with a needle about 1mm in diameter until it clears.
Finally, press down the steam button
if the appliance can produce steam normally when the steam indicator (yellow)
illuminates. Please contact the service department if the appliance can not
produce steam after operate as above.
Please see the section below about lime scale. It can seriously damage the
machine if steps are not taken to mitigate it.

AUTOMATIC POWER OFF FUNCTION

The appliance will turn itself off automatically 29 minutes after pressing ON/OFF
button.
SK22110_IM.indd 14
HOW TO USE
to switch the machine off.
and turn on the steam knob to check
14
to
19/06/2018 11:03

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents