Operating The Electronic Lock - Logiquip QT CART Programming And Troubleshooting Manual

Operating the Electronic Lock

Follow the instructions below to operate the electronic lock.
PIN CREDENTIAL
1. Enter a valid PIN (between 4 – 14 digits)
2. Press ENTER.
CARD CREDENTIAL
If the electronic lock is equipped with a card reader (HID Prox or HID iCLASS)
1. Present valid card within range of the HID reader.
DUAL CREDENTIAL
If the User or Supervisor requires a dual credential:
1. Enter a valid PIN and press ENTER.
or
Present a valid card (for HID Prox or HID iCLASS credentials).
2. Enter the second credential (4 – 14 digit PIN).
3. Press ENTER.
NOTE:
1. THE SECOND CREDENTIAL MUST ALWAYS BE A 4 – 14 DIGIT PIN.
2. LOCKVIEW SOFTWARE IS REQUIRED FOR DUAL CREDENTIAL PROGRAMMING.
LogiQuip
PO Box 278, Galesburg, MI 49053
Page 4
www.logiquip.com
(800) 665-3760 | (888) 965-3984