General Instructions Before Riding - FD Motors F3 Manual

General Instructions Before Riding

1) To ensure the vehicle is functioning correctly, do a quick check of the
vehicle's tires and check that the brakes are working. (For more
detailed maintenance instructions see the Maintenance Schedule).
Your vehicle has been thoroughly checked by our engineers before
delivery. but on the spot checks are equally important.
2) When the key is inserted and turned to the "ON" position, the power
indicator will illuminate. If current drain is over 80A, the power will be
automatically cut off to avoid over-heating.
3）To avoid unplanned acceleration, always turn the key to the "OFF"
position before dismounting or leaving the bike unattended.
4） SAFETY NOTICE: Be sure that you are seated on the bike and stands
are clear of the floor before touching the throttle handle. If you twist the
throttle before you are ready to go or while you are mounting the bike it
may run away from you and could lead to an accident.
5） This vehicle may be ridden in wet conditions, but be sure to avoid
soaking it during cleaning to avoid damaging any of the electric
components.
6） The vehicle should not be left in strong, direct sunlight for long periods
as some of the electric components may overheat.
7） Motorcyclists must abide by the same traffic rules and regulations as
other motorists. Before taking your motorcycle on a public road, be
familiar with traffic rules and regulations and any special requirements
for motorcycles.
8） Never drink and ride. Alcohol slows reflexes and greatly limits your
ability to operate a motorcycle. Even a very small amount of alcohol will
reduce your ability to operate a motorcycle safely.
9） Frequently ride at economical speed will be great help on battery life
and range. Especially at crowded city traffic.
2