Advertisement
1-3. Installation of BKP-7311
12. Tighten screws 1 and 2 shown in the figure, then
tighten the remaining four screws to install the rear
panel.
2
13. Install the power unit in the unit with four screws.
Screws
(PWH4 x 10)
Screws (PWH4 x 10)
1-4 (E)
1
Power unit
14. Insert the plug-in boards removed in step 2 in the unit
in the reverse procedures of removal.
Plug-in boards
DM
AT
VA
15. Insert the BKP-7311 in the unit,and connect the three
coaxial cables to the BKP-7311.
n
The same signal is output at connectors CN2571,
CN2572 and CN2581. Coaxial cables can be connect-
ed to every connector.
Coaxial cables
BKP-7311
Lock
BKP-7311 IM
Advertisement
