Basic Setup; Video Setup - Vantec Jukebox Manual

2.2 Basic Setup

2.2.1 Video Setup

This is guide for setting video output of the AVOX. You have to setup the AVOX's video output mode same as TV set's
video input mode.
If you cannot see anything after connecting video cable, check followings,
1. "TV "–"TV "– Switch to Video Input Mode: Turn on TV, and switch to video input mode same as video connection. See TV user
manual.
2. "AVOX" – Switch to Video Output Mode: Press [VIDEO] button repeatedly. Whenever press [VIDEO], video output signal is
changed.
3. Once you see a normal screen, you must save your video configuration on the AVOX. See "2.2.1 Video Setup"..
TV Video
Input Mode
Normal Video
S-Video
Component 480i
Component 480p
Component 720p
Component 1080i
NTSC, PAL : Standard of TV Output. Select a proper one for using in your country.
AVOX Video
Output Mode
TV Out: NTSC C/S-Video
(HD Component OFF)
TV Out: PAL C/S-Video
(HD Component OFF)
Not supported
Not supported
TV Out: NTSC C/YPbPr
(HD Component OFF)
TV Out: PAL C/YPbPr
(HD Component OFF)
HD Component Out On 480p
HD Component Out On 720p
HD Component Out On 1080i
Connection Jack
of TV, AVOX
CVBS or Composite Jack
(Generally Yellow Jack)
-
Component 3 Jack
* Y(Green), Pb(Blue), Pr(Red)
19
Video Cable Type
Supplied AV Cable
-
Supplied Component Cable
* Y(Green), Pb(Blue), Pr(Red)