Copy Data Via Usb; Windows 98Se - Vantec Jukebox Manual

1.3 Copy Data via USB

It is possible to use the AVOX|Jukebox as an external USB hard disk drive. You can copy data from your PC to the
HDD in the AVOX via USB. However, the main use is to play media files from the hard disk on a TV set.
* When connecting to a PC, we recommend connecting the power cable to the AVOX.

1.3.1 Windows 98SE

First, you have to install Windows 98 Driver before connecting PC. The driver is located at Windows 98 driver CD→Windows
98 Driver Directory. After finishing the driver installation, connect the AVOX to your PC via USB cable. If it is not detected, plug in
the AVOX power cable.
1) After installing the driver, connect the AVOX. And
then, check the driver installation at Windows [Start→
Settings→Control Panel→System→Device Manager→Hard
disk controllers→Hi-Speed USB-IDE Bridge Controller].
2) Check 'My Computer' or 'Explorer', there should be
a new volume. You can copy any data to this volume.
If a new volume does not appear, make sure the HDD
is formatted as FAT32. Windows 98SE only detects
FAT32. You may also need to connect the power cable.
3) After copying your data, remove the AVOX by using
the remove icon at Windows' right-bottom corner.
Be sure to do this before removing the AVOX to
ensure that it is safe to remove the AVOX.
13