Humminbird SCBK1 Manual

Autopilot gimbal mount

Download this manual

Autopilot Gimbal Mount

Thank You

Thank you for choosing Humminbird®, the #1 name in Fishfinders. Humminbird® has built its reputation by

designing and manufacturing top-quality, thoroughly reliable marine equipment.

Your Humminbird® accessory is designed for trouble free use in even the harshest marine environment.

In the unlikely event that your Humminbird® accessory does require repairs, we offer an exclusive Service

Policy - free of charge during the first year after purchase, and available at a reasonable rate after the

one-year period. For complete details, see the separate warranty card included with your accessory. We

encourage you to read this guide carefully in order to get full benefit from all the features and applications of

your Humminbird® product.

Contact our Customer Resource Center at 1-800-633-1468 or visit our Web site at humminbird.com.

Overview

Use the Autopilot Gimbal Mount to install the control head in a location where it can be tilted for easy

viewing. The installation kit includes the following supplies*:

• Gimbal bracket (1)

• Gimbal knobs (2)

• #10 1¼ inch screws (3)

• #10 Flat washers (3)

• #8 7/8 inch screws (2)

• 9/32 x 15/16 x 1/16 Neoprene washers (2)

• Plastic Hole cover (1)

• Plastic cable grommet (1)

*Product supplies and features are subject to change without notice.

Supplies: In addition to the hardware supplied with your installation kit, you will need a powered drill and

various drill bits, various hand tools, including a Phillips head screwdriver, a socket wrench, a flat head

screwdriver, a marker or pencil, safety glasses and dust mask, and marine-grade silicone sealant.

531788-2_A

Page 1 Autopilot Gimbal Mount Thank You Thank you for choosing Humminbird®, the #1 name in Fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird® accessory is designed for trouble free use in even the harshest marine environment.
Page 2 531788-2_A Autopilot Gimbal Mount Planning the Mounting Location To gimbal mount the Autopilot, pre-assemble the unit to plan the best mounting location. 1. Place one of the 2 neoprene washers on one of the gimbal knobs, and then thread the knob and washer into the Autopilot housing.
Page 3 531788-2_A Autopilot Gimbal Mount Installing the Gimbal Bracket Gimbal Bracket Bottom Gimbal Front 1. After the mounting location is determined, loosen the gimbal knobs and remove the control head from the gimbal bracket. 2. Place the gimbal bracket in the chosen position on the mounting surface and mark the three mounting screw locations using a pencil or center punch.
Page 4 531788-2_A Autopilot Gimbal Mount Contact Humminbird® Contact the Humminbird® Customer Resource Center ENVIRONMENTAL COMPLIANCE STATEMENT: It is the intention of in any of the following ways: Johnson Outdoors Marine Electronics, Inc. to be a responsible corporate citizen, operating in compliance with known and applicable environmental...