Advertisement
RUBBER PLATTER
When should I replace my rubber platter?
There is no specific time frame for how long a Rubber Platter will last, it could be one day or one year, depending on how the
machine is used and maintained. If the disc can no longer sit flat on the Rubber Platter, or the imprinting on the surface is no longer
visible, then the Rubber Platter should be replaced. If there are any nicks, gouges, edges that are lifted, or tares – the Rubber Platter
should be replaced.
How to replace the Rubber Platter:
1.
Turn off power to the unit!
2.
Locate the two side panel thumbscrews and unscrew them.
3.
Lift side panel up and away from the machine.
4.
Locate the Rubber Platter.
5.
Peel old Rubber Platter off of the platen.
Note: A razor blade or a scraper can be used to do this.
6.
Take the new Rubber Platter and remove the white backing.
7.
Center and place the new Rubber Platter on the platen.
8.
Make sure the Rubber Platter is fully seated on the platen.
9.
Install the side panel and screw down the thumbscrews.
10.
Turn on power.
BUFFING WHEELS
How to replace the Buffing Wheels:
1.
Turn off power to the unit.
2.
Locate the two side panel thumbscrews and unscrew them.
side panel up and away from the machine.
3.
Locate the Splash Guard which sits on top of the main motor
and above the Buffing Wheel.
4.
Pull up on the Splash Guard until it releases from the main motor.
Note: The Splash Guard is a snap fitted piece.
5.
Located on front of the Buffing Wheel, is a washer and a Spade
style screw, which holds the Buffing Wheel to the spindle. Hold
the Buffing Wheel with one hand and turn the Spade Screw
counter clockwise with the other.
6.
Remove the screw and the washer from the spindle and pull
off the old Buffing Wheel.
7.
Install the new Buffing Wheel. Insert the washer and tighten
down the screw.
8.
Reinstall the Splash Guard by snapping it onto the top of the
main motor.
Note: Pull the Splash Guard forward until it snaps into place a
second time.
9.
Install the side panel and screw down the thumbscrews.
10.
Turn on power.
REPLACING CONSUMABLES
Lift
Advertisement
