Table of Contents
Advertisement
Quick Links
Installation Instructions
LSL BE - Lift System Light Box Enclosure
Design Highlights
-Quiet Smooth Lifting Action at Approximately 40mm [1.6"] per Second
-Full Cable Management
-Wide Range of Mounting Options
-24V DC Motor. Suitable for Direct DC Supply
-Marine Suitable Robust Beam
Thank you for choosing
futureautomation
email info@futureautomation.co.uk tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
ISSUE 002
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Future Automation LSL BE Series
Summary of Contents for Future Automation LSL BE Series
- Page 1 Installation Instructions LSL BE - Lift System Light Box Enclosure Design Highlights -Quiet Smooth Lifting Action at Approximately 40mm [1.6”] per Second -Full Cable Management -Wide Range of Mounting Options -24V DC Motor. Suitable for Direct DC Supply -Marine Suitable Robust Beam Thank you for choosing futureautomation email info@futureautomation.co.uk tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565...
-
Page 2: Safety Information
Exceeding the weight capacity can result in serious personal injury or damage to equipment. Future Sound & Vision trading as Future Automation intend to make this and all documentation as accurate as possible. However, Future Automation makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. -
Page 3: Table Of Contents
LSL BE - Lift System Light Box Enclosure Contents Page Introduction Safety Information Contents Contents Tool Indicator Icons Installation Parts List Package Contents Stage 1 Before You Start Remove KH Screen Mount Stage 2 Fixing the Lift in the Cabinet Stage 3 KH Upright Assembly Stage 4... -
Page 4: Contents
Any damage to products during transit that is not checked and notified as “unchecked” or “damaged” upon receipt of delivery. Any part of your system that needs to be replaced during a warranty repair becomes the property of Future Automation. -
Page 5: Package Contents
LSL BE - Lift System Light Box Enclosure Package Contents Nuts & Bolts Multipack: A range of nuts, bolts, washers 1 - Mechanism and spacers to help add in the 1.1 - Back Plate mounting for your screen 1.2 - Lifting Drive 1.3 - Base Panel Brackets 1.4 - KH Lifting Plate 1.5 - Screen Mount... -
Page 6: Before You Start
LSL BE - Lift System Light Box Enclosure Before You Start Check the Operation of the Mechanism. Firstly, remove all the red cable ties which keep the mechanism safe and secure during transit. Once they have all been removed, the mechanism can be powered up and tested. Connect the supplied IR lead and check that the mechanism operates correctly before continuing with the installation. -
Page 7: Fixing The Lift In The Cabinet
LSL BE - Lift System Light Box Enclosure Fixing the Lift in the Cabinet Place the mechanism within the cabinet. Fix the lift where possible down the back face. Make sure that the lifting plate is central by using the centre line marks on the back of the back face. -
Page 8: Kh Upright Assembly
LSL BE - Lift System Light Box Enclosure KH Upright Assembly Below shows the KH UPRIGHT assembly. To release the SCREEN MOUNT PLATE rotate the top LOCKING LEVER and lift off the TOGGLES. The TOGGLES can adjust the height by moving up or down the KH UPRIGHT. The ENCLOSURE MOUNT BRACKETS fix to the side of the KH UPRIGHT and slide up and down to support the enclosure lid. -
Page 9: Mounting The Box Enclosure
LSL BE - Lift System Light Box Enclosure Mounting the Box Enclosure After the mechanism is in the correct position the next step is to lower the BOX ENCLOSURE into place and fix from the underside through the BASE PANEL BRACKETS. A good tip is to place the BOX ENCLOSURE in place and draw marks from the underside through the BASE PANEL BRACKETS, then fix using a wood screw and a large penny washer, this will allow you to adjust the position. -
Page 10: Attaching The Enclosure
LSL BE - Lift System Light Box Enclosure Attaching the Enclosure With the mechanism still in the UP position fix the base panel to the BASE PANEL BRACKETS, adjust the height so the base panel sits flush to the cabinet top. Then adjust the ENCLOSURE LID BRACKETS to the correct height to support the cabinet lid and enclosure. -
Page 11: Routing The Cables & Screen Mount Plate Fixings
LSL BE - Lift System Light Box Enclosure Routing Cables & Screen Mount Plate Fixing Once the ENCLOSURE is fixed to the mechanism thread the screen and power cables through the cable management chain and then through the lifting beam shown with the orange dotted line. -
Page 12: Screen & Box Enclosure Mounting
LSL BE - Lift System Light Box Enclosure Screen & Box Enclosure Mounting Slide the screen into the enclosure and fix to the SCREEN MOUNT PLATE. A good tip is to use a packer under the screen and remove once fixed and secure. -
Page 13: Switch Adjustments
LSL BE - Lift System Light Box Enclosure Switch Adjustments You can adjust the IN and OUT position of the lifting beam. Detail 1 shows how to adjust the OUT position and detail 2 shows how to adjust the IN position. The IR sensor can be located anywhere outside of the cabinet. 1 - The top switch can’t be adjusted when the mechanism is in the OUT position, because... -
Page 14: Contact Closure
LSL BE - Lift System Light Box Enclosure Contact Closure - Use an RJ45 connector in the CCI socket on the control box to operate via contact closure WIRE / CABLE CONTACT CLOSURE DESCRIPTION ACTION 568A 568B LED INDICATOR 12V SUPPLY 12V SUPPLY - CURRENT LIMITED When 12V attached, device will go OUT. -
Page 15: Rs232 Controls
LSL BE - Lift System Light Box Enclosure RS232 - Use an RJ25 connector in the socket marked RS232 on the control box to operate using RS232 Pin 1: RX Pin 6 : TX Pin 2: TX Pin 3 & 4: GROUND Pin 3: RX Pin 5: GROUND Details... -
Page 16: Ir Controls
Only buttons indicated are functional with the product. Any button pressed when in motion will stop the mechanism. Replacing batteries Future Automation IR Remote Controller needs x2 AAA batteries which are provided within the packaging Page 15 of 18 // email info@futureautomation.co.uk tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565... -
Page 17: Trouble Shooting
LSL BE - Lift System Light Box Enclosure Lift System Light Box Enclosure - Trouble shooting guide Lift System Light Box Enclosure - Trouble shooting For information on our products please refer to our web site - www.futureautomation.co.uk or for questions on installations and our product range please phone us on - +44(0) 1438 833577 and ask for our technical support department Page 16 of 18 // email info@futureautomation.co.uk tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565... -
Page 18: Technical Overview
LSL BE - Lift System Light Box Enclosure Technical Overview A general technical overview of the LSL BE lift mechanism range Page 17 of 18 // email info@futureautomation.co.uk tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565... -
Page 19: Notes
LSL BE - Lift System Light Box Enclosure Notes... Page 18 of 18 // email info@futureautomation.co.uk tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565... - Page 20 Future Automation Unit 2 Kimpton Enterprise Park Claggy Road Kimpton Hertfordshire SG4 8HP United Kingdom Tel: +44 (0) 1438 833 577 Fax: +44 (0) 1438 833 565 Email: info@futureautomation.co.uk www.futureautomation.co.uk...
Need help?
Do you have a question about the LSL BE Series and is the answer not in the manual?
Questions and answers