Ferris Venture Series Operator's Manual page 7

2
A
D
C
E
A- Part No.: 5103184 DECAL, WARNING, HAND IN
BELT, ENG. ONLY
Loss of control
Operating on slopes can be hazardous and cause loss of control.
• Avoid sudden turns or rapid speed changes.
• Go across slopes, NOT up and down.
• Reduce speed and use
extreme caution on slopes.
• If machine stops forward
motion on a slope, stop.
Get o and walk the
machine slowly o the
slope.
• Do NOT operate on
slopes when grass is wet.
Caustic liquid / chemical burn and gases inhalation hazard.
• Follow instructions for handling and wear all personal protective
equipment as recommended on the manufacturer's label of any
herbicides, pesticides, or other chemicals used.
Part No.: 5105766 DECAL, DANGER
B-
A
B
C
Thrown object
hazard.
• Do NOT operate
when people are
nearby.
Part No.: 5103184- DECAL, WARNING, HAND IN
C-
BELT, ENG. ONLY
CAUTION
MUFFLER AND
SHIELDS MAY
EXCEED 150 F
Part No.: 5106507 - DECAL, CAUTION, MUFFLER
D-
TEMP
E- Part No.: 5106708 - DECAL, WARNING
Operator Safety
7