2. Charging and Powering the Monitor Unit For the best results, charge the monitor unit before use. After the initial charge, recharge normally as required. The monitor unit works normally with the power adapter plugged into the unit. ① Plug the USB power adapter into an electrical outlet. Connect the USB cable to the micro-USB of the monitor unit.
② Press the “-” left button or the “+” right button until the desired cam icon is FUNCTION INTRODUCTION highlighted and press the OK button to start searching for a Camera Unit. 1. USING THE CAMERA UNIT ① This camera unit (baby unit) uses a DC 5V/1A power adapter. ②...
Page 6
4. Screen icons are as follows: 5. Menu Option The menu options are as follows: 24℃ 10:44AM 10:44AM 4:00 3:00 2:00 1:00 0:00 Press the menu button to pop up the menu, which contains 6 settings: eSignal strength Feeding reminder setting Current camera (press the camera switching button to switch.
Page 7
② Lullaby selection setting • Select Delete , press the OK button and two suboptions will pop up: Select the lullaby selection setting: Press the up or down button to select, then press the OK button to confirm. (The Delete option is to delete a camera that has been Press the up or down button to select the lullaby, then press the paired successfully).
Note: The design and specifications of this product are subject to change without displayed in black and white. prior notice. CONTACT US For any inquiries with Dragon Touch products, please feel free to contact us, we will respond within 24 hours. E-mail: cs@dragontouch.com Tel: 888-811-1140 (US) Mon-Fri (except holidays) 9am-5pm (EST)
Need help?
Do you have a question about the E40 and is the answer not in the manual?
Questions and answers