Removing The Circuit Board; Remove Mounting Screws - Raypak 013464F Replacement Instructions Manual

REMOVING THE CIRCUIT BOARD

Make sure the power and gas are off.
1. Unplug all connectors from old circuit board. See
2. Unplug keypad ribbon from old circuit board.
Fig. 5.
3. Remove screws as shown in Fig. 6.
4. Remove old circuit board.

REMOVE MOUNTING SCREWS

Page 3
REMOVE KEYBOARD
RIBBON
Fig. 6
241417
P/N Rev 4
Effective: 12-04-12
Replaces: 10-07-11
UNPLUG
ALL CONNECTORS
Fig. 5