Related Manuals for LOGICDATA ACS-CB-SENS
Summary of Contents for LOGICDATA ACS-CB-SENS
- Page 1 MANUAL Document Version 3.0 / March 2020 ACS-CB-SENS Valid for: LOG-PRT-DMS-300 LOG-PRT-DMS-LD DMS Cover...
- Page 2 ACS-CB-SENS - MANUAL // PAGE 2 ACS-CB-SENS - Operating Manual Document Version 3.0 / March 2020 This document was originally published in English. LOGICDATA Electronic & Software Entwicklungs GmbH Wirtschaftspark 18 8530 Deutschlandsberg Austria Phone: +43 (0) 3462 51 98 0...
-
Page 3: Table Of Contents
Key Product Features Dimensions ACS-CB-SENS Dimensions LOG-PRT-DMS Assembly Safety During Assembly Required Components Notes for Assembly Mounting the ACS-CB-SENS Mounting the LOG-PRT-DMS 6.5.1 Attaching the DMS Cover Connecting the LOG-PRT-DMS to the ACS-CB-SENS 15 Connecting the ACS-CB-SENS to the Control Box... - Page 4 ACS-CB-SENS - MANUAL // PAGE 4 System Information Additional Information Software-Dependent Functions Disassembly Maintenance 8.3.1 Cleaning 8.3.2 Replacing a Collision Sensor Troubleshooting Disposal...
-
Page 5: General Information
Height-Adjustable Table Systems. The license does not include logos, designs, and page layout elements belonging to LOGICDATA. The Reseller may make any necessary changes to the text and images to adapt them for the purpose of end user documentation. Texts and images may not be sold in their current state, and may not be published or sublicensed digitally. -
Page 6: Safety
2.3 INTENDED USE The ACS-CB-SENS is a Collision Sensor Unit for electrically Height-Adjustable Tables. It is installed by Resellers into Height-Adjustable Table systems. It is used to recognize collisions between the Table System and other objects. -
Page 7: Explanation Of Symbols And Signal Words
Indicates important tips for handling the product. INFO 2.6 LIABILITY LOGICDATA products comply with all currently applicable health and safety regulations. However, risk can result from incorrect operation or misuse. LOGICDATA is not liable for damage or injury caused by: • Improper product use •... -
Page 8: Residual Risks
Be careful not to trip over Cables Risk of minor or moderate injury through crushing CAUTION The ACS-CB-SENS is not intended as a user safety device. Failure to observe basic safety precautions may lead to minor ot moderate injury through crushing. •... -
Page 9: Notes For Resellers
ACS-CB-SENS - MANUAL // PAGE 9 2.9 NOTES FOR RESELLERS Resellers are companies that purchase LOGICDATA products for installation in their own products. For reasons of EU conformity and product safety, Resellers should provide end users INFO with an Operating Manual in their native EU official language. -
Page 10: Product
Chapter 5.2 shows a standard model of the ACS-CB-SENS Collision Sensor, including additional products. The exact variant of the ACS-CB-SENS is denoted by the product's order code. Consult the accompanying data sheet to ensure that you have received the correct variant. -
Page 11: Dimensions Acs-Cb-Sens
ACS-CB-SENS - MANUAL // PAGE 11 5.3 DIMENSIONS ACS-CB-SENS Length (with mounting points) 74.2 mm | 2.921 “ Width 50.0 mm | 2.165 " Height (to underside of Table Top) 30.0 mm | 1.181 " " Fig. 1: Product dimensions, ACS-CB-SENS 5.4 DIMENSIONS LOG-PRT-DMS... -
Page 12: Assembly
ACS-CB-SENS - MANUAL // PAGE 12 6 ASSEMBLY This chapter describes the process of installing the ACS-CB-SENS processing unit and the LOG-PRT-DMS Collision Sensor into the Height-Adjustable Table System. SAFETY DURING ASSEMBLY Risk of death or serious injury through electric shocks WARNING Collision Sensors and their components are electrical devices. -
Page 13: Notes For Assembly
Exact dimensions for the LOG-PRT-DMS and ACS-CB-SENS can be found in the prod- uct's datasheet. 6.4 MOUNTING THE ACS-CB-SENS Ensure the ACS-CB-SENS is mounted in a place from which the cables can easily reach NOTICE the Control Box and LOG-PRT-DMS Sensor. Stretching or straining cables or connectors may lead to system damage. -
Page 14: Mounting The Log-Prt-Dms
The sensor can be attached to the Crossbar using a bolt with a nut and a washer or a self-tapping screw. Contact LOGICDATA for exact specifications. LOGICDATA recommends a tightening torque of 3 Nm for the connection to the INFO Crossbar and 2 - 2.5 Nm for the connection to the table top, depending on material used. -
Page 15: Connecting The Log-Prt-Dms To The Acs-Cb-Sens
To avoid strain on Cables, ensure the LOG-PRT-DMS is mounted a suitable distance from NOTICE the ACS-CB-SENS. The RJ sockets on the ACS-CB-SENS may only be used to accommodate LOGICDATA- DANGER approved sensor units. Inserting other telecommunication-type sensors into these terminals may cause damage to the Control Box or other products in the system. -
Page 16: Connecting The Acs-Cb-Sens To The Control Box
ACS-CB-SENS - MANUAL // PAGE 16 6.7 CONNECTING THE ACS-CB-SENS TO THE CONTROL BOX To avoid strain on Cables, ensure the ACS-CB-SENS is mounted a suitable distance from NOTICE the Control Box. Ensure the Control Box is not connected to the power source. - Page 17 To disassemble, disconnect the Control Box from the mains. Then, follow the assembly instructions in re- verse order. 8.3 MAINTENANCE The ACS-CB-SENS and LOG-PRT-DMS are maintenance-free for their entire service lifetime. Risk of death or serious injury through electric shocks and other hazards WARNING Using a Collision Sensor alongside unauthorized spare or accessory parts may lead to death or serious injury through electric shocks and other hazards.
- Page 18 LOGICDATA LOGICDATA North America, Inc. Electronic & Software Entwicklungs GmbH 5300 Broadmoor Ave SE, Suite D Wirtschaftspark 18 Grand Rapids, MI 49512 8530 Deutschlandsberg Austria Phone: +1 (616) 328 8841 Phone: +43 (0)3462 5198 0 Email: office.na@logicdata.net Fax: +43 (0)3462 5198 1030 Email: office.at@logicdata.net...