Advertisement
Advertisement
Table of Contents
Related Manuals for Epson WH-5674
Summary of Contents for Epson WH-5674
- Page 1 User manual REMOTE CONTROLLER WH-5674...
- Page 2 RCU image RCU Sticker...
- Page 3 Button description System code： 0x007f...
- Page 4 <12ms 5）Remote control distance：≥10m 6）Bluetooth device name：EPSON ATV REMOTE Remote control other requirements 1）Pairing function requirements: Do not scan Bluetooth devices or pairing (including short time) to press the pairing button continuously, please confirm 50 times to ensure no problem;...
- Page 5 FCC Compliance statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in residential installations.
- Page 6 （2）l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement. Déclarationd'exposition aux radiations: Cetéquipementestconforme aux limitesd'exposition aux rayonnements IC établies pour un environnement non contrôlé.
Need help?
Do you have a question about the WH-5674 and is the answer not in the manual?
Questions and answers
The remote will not pair with the projector
To fix the pairing issue between the Epson projector and remote WH-5674, follow these steps:
1. Initiate Pairing Mode: Press and hold the “OK” + “VOL-” buttons simultaneously for 3 seconds until the indicator light flashes.
2. Check Pairing Status: If pairing is successful, the indicator light will turn off after 3 seconds.
3. Retry Pairing If Unsuccessful: If pairing fails, continue pressing the OK + VOL- buttons to resend the pairing broadcast.
4. Ensure Proper Conditions:
- Do not clear the pairing before attempting again.
- Maintain a connection interval of less than 12ms.
- Keep the remote within ≥10m distance from the projector.
5. Verify Bluetooth Connectivity: Ensure the remote is in Bluetooth mode and not sending infrared signals.
6. Check for Interference: Ensure the remote connection does not affect the projector's WiFi throughput.
7. Confirm Power and Battery Status:
- If the indicator light flashes quickly, the battery is low; replace it.
- If power was interrupted, wait for at least 2 hours and test reconnection 50 times.
If the issue persists, consider resetting the projector’s Bluetooth settings and repeating the pairing process.
This answer is automatically generated