Download Print this page
   

Advertisement

Epson PowerLite 570 / 575W / 580 / 585W

Remote Control Operation

The remote control lets you control the projector from almost anywhere in the room, up to 19.7 feet (6 m)
away. You can point it at the screen or board, or the front or back of the projector.
Make sure that you aim the remote control at the projector's receivers within the angles listed here.
1
19.7 feet (6 m)
2
± 30º
3
± 55º
4
± 60º
5
± 75º
6
± 15º
Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or
the projector may not respond to commands. If you will not use the remote control for a long time,
remove the batteries.
Using the Remote Control as a Wireless Mouse
You can use the projector's remote control as a wireless mouse so you can control projection at a
distance from the computer.
1. Connect the projector to a computer using the projector's USB-B, Computer, or HDMI port to
display video.
2. If you connected your computer to the Computer or HDMI port, also connect a USB cable to the
projector's USB-B port and to a USB port on your computer (for wireless mouse support).
3. Start your presentation.
INSTALLATION HANDBOOK
Remote Control Info
1

Advertisement

   Also See for Epson 570

   Related Manuals for Epson 570

   Summary of Contents for Epson 570

  • Page 1: Remote Control Operation

    INSTALLATION HANDBOOK Epson PowerLite 570 / 575W / 580 / 585W Remote Control Info Remote Control Operation The remote control lets you control the projector from almost anywhere in the room, up to 19.7 feet (6 m) away. You can point it at the screen or board, or the front or back of the projector.

  • Page 2

    INSTALLATION HANDBOOK Epson PowerLite 570 / 575W / 580 / 585W Remote Control Info 4. Use the following buttons on the remote control to control your presentation: • To move through slides or pages, press the up or down Page buttons.

  • Page 3

    INSTALLATION HANDBOOK Epson PowerLite 570 / 575W / 580 / 585W Remote Control Info Selecting an Image Source If you connected multiple image sources to the projector, such as a computer and DVD player, you may want to switch from one image source to the other.

  • Page 4

    INSTALLATION HANDBOOK Epson PowerLite 570 / 575W / 580 / 585W Remote Control Info Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly. • Front/Upside Down (default setting) flips the image over top-to-bottom to project upside-down from a wall or ceiling mount.

  • Page 5

    INSTALLATION HANDBOOK Epson PowerLite 570 / 575W / 580 / 585W Remote Control Info Changing the Projection Mode Using the Menus You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the projector menus. 1. Turn on the projector and display an image.

This manual also for:

585w, 580, 575w

Comments to this Manuals

Symbols: 0
Latest comments: