Control Panel - Zanussi ZUAN88ES User Manual

min.
5 cm
200 cm

CONTROL PANEL

Power indicator light
1
Temperature regulator and On/Off switch
2
FastFreeze light
3
SWITCHING ON
1. Insert the plug into the wall socket.
2. Turn the Temperature regulator clockwise to a
medium setting.
If the temperature inside the appliance is too high,
the Alarm light will blink and the acoustic alarm will
turn on.
3. Push the FastFreeze switch and the acoustic
alarm will turn off. The Alarm light will blink until
the internal temperature has reached a level
required for the safe conservation of frozen
food.
SWITCHING OFF
1. Turn the Temperature regulator to the "O"
position.
The Power indicator light will switch off.
2. Remove the plug from the wall socket.
8
2
min.
200 cm 2
1 2
CAUTION! Refer to the installation
instructions for the installation.
DOOR REVERSIBILITY
Please refer to the separate document with
instructions on installation and door reversal.
CAUTION! At every stage of reversing
the door protect the floor from
scratching with a durable material.
3 4 5
FastFreeze switch and alarm reset switch
4
Alarm light
5
TEMPERATURE REGULATION
The temperature is regulated automatically.
However, you can set a temperature inside the
appliance yourself.
Choose the setting keeping in mind that the
temperature inside the appliance depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most suitable
one.
To operate the appliance:
1. Turn the temperature regulator clockwise to
obtain a lower temperature inside the
appliance.
2. Turn the temperature regulator
counterclockwise to obtain a higher
temperature inside the appliance.