Toro 136-4360 Installation Instructions page 3

Installing the Front Skid Plates
1. Remove the existing hardware (2 bolts and 2 nuts) from the manifold on the left side of the machine
1. Bolt—existing hardware
2. Manifold
3. Hub bracket
4. Nut—existing hardware
2. Align the holes in a front skid plate with the holes in the manifold
3. Use 2 bolts (3/8-16 x 4 inches) and 2 flange nuts to secure the front skid plate to the hub bracket
Figure 5
Left Side Shown
5. Bolt (3/8-16 x 4 inches)
6. Front skid plate
7. Flange nut
(Figure 5).
3
(Figure 5)
g205111
(Figure 5).