Advertisement
SOLAR RAIL LIGHT– 7"
MODEL: LL-SRL-7-S-WBA
1
Remove the battery cover from the bottom of the
light.
The battery is not connected when shipped.
3
Connect the Light Cover: NOTE make sure to align the
connector notches and red/black wire colors when plugging
the two sides together.
2
Connect battery with identical clear wire inside.
Tuck all wires
under the
silicone pad
4
Place the silicone pad in place and tuck all wires so they do
not interfere with the silicone pad. The pad needs to make
a tight seal around the edges of the product.
PO BOX 414
Phone: 260-918-2758
105 W. Simon St.
Fax:
Laotto, IN 46763
E-mail sales@lakelite.com
IMPORTANT:
and ensure no wires are
between the silicone pad
and the edges.
260-918-3540
www.lakelite.com
www.solarpilinglites.com
TAKE CARE
Advertisement
