Home Leisure Direct ArcadePro Jupiter 5794 How To Use

ArcadePro Jupiter 5794 Arcade Machine - How To Use

Setting Up and Powering Up

To power up the Jupiter, plug the included power lead into the wall, and then into the single

power plug in the back of the machine. Flip the Main Power Switch to power the machine on.

The Machine will boot up to the game selection menu.

If you wish, you can switch off the under-lighting of the Jupiter using the small red rocker

switch on the rear of the machine. Note that this will only affect the under-lighting, and not

the illuminated buttons.

Page 1 of 4

Table of Contents

Do you have a question about the ArcadePro Jupiter 5794 and is the answer not in the manual?

Page 1 ArcadePro Jupiter 5794 Arcade Machine - How To Use Setting Up and Powering Up To power up the Jupiter, plug the included power lead into the wall, and then into the single power plug in the back of the machine. Flip the Main Power Switch to power the machine on.
Page 2 Foreword The 5794 arcade system is a highly configurable system, and allows access to many internal settings and options. Changing any of these options or settings is done entirely at the owner’s risk. Access to these menus is usually achieved by hitting the credits button whilst in the main menu. You are able to exit out of this menu pressing the B button.
Page 3 Starting and Exiting Games After a game is selected, you can begin either a one player game with the Player 1 Start button, or a two player game with the Player 2 Start button. Some games may require additional presses of the Insert Coin button before a game can be started. To exit a game, you can do so by pressing and holding both the Insert Coin Button and the Player 1 Start Button.
Page 4 Moving And Securing The Machine The Jupiter is on four castor wheels to allow for easy moving of the machine wherever you need. If you wish to immobilise the cabinet in place, you can do so with four feet under the machine next to each wheel.