Related Manuals for Home Leisure Direct Arcadepro Neptune
Summary of Contents for Home Leisure Direct Arcadepro Neptune
- Page 2 Setting Up Powering Up To switch the unit on, plug the power cable into a wall socket, then the connecting lead into the Power Plug on the side of the machine. Power the machine on by flipping the power switch to on. The machine will power on, and load up the games menu.
- Page 3 Neptune Controls (Side) - Scroll up Down - down Select Insert Coin Left - Page back Game/Player 1 Start Right - Page forward Change Player 2 Start Games List To Play a Game Note: It is not possible to add any additional games to the system. To play a game, you must first ‘insert coins’...
- Page 4 Switching Games Lists The ArcadePro Neptune separates games depending on whether they are meant to be played in portrait (vertically) or in landscape (horizontally). Upon start up, the Neptune will load the landscape games list. If you wish to switch another games list, simply hit the Player 1 B button on either set of controls.
-
Page 5: Changing The Volume
When done, you can simply close the door and lock up again. Adjusting the Feet The ArcadePro Neptune’s feet can each be individually adjusted. To adjust the feet, simply twist the feet in either direction to move up or down. -
Page 6: Troubleshooting
Troubleshooting No Sound If there is no sound on your ArcadePro system, check to see if the amplifier on the system is switched on, turned up and that the cabling going into the amplifier system is securely connected. If problem persists after these checks, contact us. Changing Components and configuring joysticks Buttons and joysticks on the system can be swapped over quickly.