Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for GasLab TecPen
Summary of Contents for GasLab TecPen
- Page 1 TecPen MAP Oxygen Analyzer User Manual Revised 28 Jan 2020...
-
Page 2: Table Of Contents
Layout & Controls ..........................4 Operation ............................5 Operating Principle ........................5 Before You Begin ........................5 Turning the TecPen On ....................... 5 Taking a Measurement ........................ 5 Turning the TecPen Off ....................... 5 Saving Data ............................6 Default Operation ........................6 ... -
Page 3: General Safety Guidelines
Only use original accessories. The device must not be opened. Never immerse the TecPen in water or other liquids. The device must be kept out of the reach of children. Do not fill with solvents, alcohol or cleaning agents, you may damage the device. -
Page 4: Introduction
Introduction The TecPen MAP Oxygen Analyzer is designed to provide fast, accurate measurements of 0-5% oxygen content in closed and pierceable containers. It uses an optical gas sensor with LED display as well as Bluetooth and USB connectivity. This makes it an excellent tool for: ... -
Page 5: Layout & Controls
Layout & Controls 1. Start Button – press to start measurement 2. OLED Display 3. PWR (Power) LED – Lights when the TecPen is turned on 4. BT (Bluetooth) LED – Lights when a connection is established 5. Memory Button – press to save measurement 6. On/Off Button – press briefly to turn on; hold down to turn off 7. USB Port – copy data log files to a PC 8. Sampling Gas Inlet (Cannula) 9. Gas Outlet The rating plate must not be removed or modified without permission from the manufacturer - Ensure that the rating plate remains legible. -
Page 6: Operation
TecPen. However, in most cases before taking a measurement the hose and filter should be attached to the TecPen to prevent contamination of the gas chamber. To do this, place the hose on the gas inlet (8) and fasten the filter to the other end of the hose. Attach the cannula to the front of the filter. -
Page 7: Saving Data
Output Data File Format The TecPen outputs a comma-delimited text file (.txt) with a header row that can be imported into any spreadsheet program. The file name is YYY-MM-DD_oxygen_logfile.txt . The data file... -
Page 8: Customizing The Data File Format
TecPen on and before you begin collecting data. Menu Options In addition to the main screen the TecPen has 4 menu options screens that can be accessed by pressing and holding the memory button. Change Data File Format (Recipes) 1. -
Page 9: Calibration
The TecPen uses pure nitrogen gas for zero point calibration. 1. In order to adjust the zero point, the TecPen must first be purged with pure nitrogen. This can be done by plugging the cannula into the TecPen, inserting the cannula into a tube from the nitrogen test gas cylinder and purging all the tubing with nitrogen. -
Page 10: Display
Display Press the Memory Save button for two seconds to switch the display between the following: Screen 1: battery level main measured value screen Temporary Memory/Log Indicator Indicator for current measurement Screen 2: Consecutive / internal Recipe settings number product name, EAN code Screen 3: date time (24 hour clock) -
Page 11: Maintenance
Do not fill with solvents, alcohol or cleaning agents, they may damage the device. Battery The TecPen uses LiPo batteries. The duration per battery charge depends on how and under what circumstances the device is used. Charge the battery using the supplied USB cable. Once the battery is fully charged, remove the battery from the charging cable. -
Page 12: Troubleshooting Guide
The BlueTooth light does not light up during the BlueTooth light does not light up. charging. The TecPen is connected to a PC via USB but You must turn the TecPen on before connecting it the PC cannot find it as a drive. -
Page 13: Specifications
Warranty The TecPen comes with a one year warranty starting from the date it was shipped to the buyer. The TecPen sensor comes with a 90 day warranty. For more information visit our website: https://www.GasLab.com/pages/terms-conditions...