Belt Drive; Front Fork; Seatpost Suspension - Qwic Premium Q MN8 Manual

5.4. Front fork

The e-bike is equipped with a suspension fork that has lock-out
functi onality. To temporarily switch off the suspension in the fork, for
example when cycling at high speeds, you can turn the speed lock butt on
located on the right side of the fork clockwise. This will increase the
effi ciency of the e-bike at the expense of comfort.
It is also possible to fi ne-tune the suspension by using a dedicated pump.
Increase the pressure in the fork to a maximum of 100 PSI.
bell Do not use a regular bicycle pump in this case as you may
permanently damage the fork. Consult your dealer in case
of doubt.

5.5. Seatpost suspension

It is also possible to adjust the spring load of the seatpost suspension.
First loosen the seat clamp and take the seatpost out of the frame.
The silver bus on the bott om side of the seatpost can be rotated in the
black outer tube to adjust the suspension. Use an allen key and rotate
clockwise to ti ghten the suspension or rotate counterclockwise to
loosen the suspension.
bell
Please make sure that the silver bus never protrudes the edge of
the black outer tube. If the silver bus is loosened too far, it can
break loose due to pressure from the spring.
5. COMPONENTS
41