Advertisement

MX300 XE
DJ MIXER

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MX300 XE and is the answer not in the manual?

Questions and answers

Summary of Contents for Phonic MX300 XE

  • Page 1 MX300 XE DJ MIXER...
  • Page 2 IMPORTANT SAFETY INSTRUCTIONS The apparatus shall not be exposed to dripping or splashing and that no objects with liquids, such as vases, shall be placed on the apparatus. The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.
  • Page 3: Table Of Contents

    MX300 XE DJ MIXER INTRODUCTION........................4 FEATURES........................4 GETTING STARTED........................4 FRONT PANEL.......................5 BACK PANEL.......................7 SPECIFICATIONS........................8 Phonic preserves the right to improve or alter any information within this document without prior notice. V1.0 Mar 15th, 2011...
  • Page 4: Introduction

    Congratulations on your purchase of the Phonic MX 4Separately controllable monitor-output (DJ-booth) DJ Mixer series – MX300 XE. In order to get the for connecting active speaker or an additional best performance of the MX DJ Mixer series, please amplifier read all safety and owner’s manual carefully before...
  • Page 5: Front Panel

    14 dB, so that the microphone fader. Make sure that the PHONO/LINE/MIC switch can be clearly heard. In the OFF position, all signals is set to MIC. returns to their original level. MX300 XE...
  • Page 6 Used to adjust how much of the signal is sent to the channel. left and right master socket. 11. Middle Control 22. Master Control Used to increase or lower the MIDs of the input Adjust the level of the master-output. channel. MX300 XE...
  • Page 7: Back Panel

    Connect your monitor system here. 28. REC OUT Output To connect your recording unit. These jacks are RCA types, which are suitable for connection of a recording device. Its level is not influenced by the master control. MX300 XE...
  • Page 8: Specifications

    SPECIFICATIONS MX300 XE Input 3 phono, 3 line, 3 mic 1 master, 1 rec Output 1 booth via RCA Minimum Input Voltage Phono 3.2mV RMS, 47kOhms Line 150mV RMS, 47kOhms Microphone 3mV RMS, 2.2kOhms Output Voltage Line 7V RMS max Headphones 0.4V...
  • Page 9 http://www.phonic.com...

Table of Contents