Table of Contents
Advertisement
User Instructions
Radio operation
1. Turn the volume control – on/off
knob (6) upward to switch the radio
on.
2. Set the waveband selector (5) to the
required waveband.
3. Turn the tuning control knob (3) to
select the frequency and station of
choice. The radio frequency scale
will show the waveband selected.
4. Adjust the volume to the desired
level by rotating the volume control
knob (6).
5. To turn off the radio, turn the
volume control – on/off knob (6)
downward until a "click" sound is
heard.
Note :
The built-in AM and the external FM
antennas are directional. If tuning into a
FM station extend or move the antenna (2)
for a better reception. If tuning into a AM
station rotate the whole unit after tuning
to obtain the best reception.
Using Headphones (not included)
A headphone jack has been provided
so that the set can be used without
disturbing others. Plug in the 3.5mm
headphones at the point marked ' '.
Turn the listening volume to the
lowest setting before adjusting the
volume up to your chosen level.
Excessive
sound
earphones and headphones can cause
hearing loss. The speaker will not
operate when headphones are fitted.
5
pressure
from
Advertisement
Table of Contents
