Alba PR-203 Instruction Manual page 6

Portable
Table of Contents

Advertisement

User Instructions
Battery installation
To use the appliance with batteries ensure
that the AC power cord is NOT inserted
into the appliance and install the batteries
into the battery compartment (9). To
install the batteries –
1. Lift off the battery compartment
cover from the rear of the unit.
2. Insert 4 x Size "C" / UM-2 / LR14 (or
equivalent) 1.5V heavy-duty alkaline
batteries in accordance with the
diagram in the battery compartment.
Take care to observe the correct
polarity (+/ -).
3. Refit the battery compartment cover.
4. Do not expose the battery or the
installed battery to excessive heat (eg
fire, sunshine or position close to
radiators etc.).
Note
Dispose of batteries responsibly at
local authority household waste
recycling facility.
DO NOT dispose of batteries in a
fire as the batteries may explode.
Only use 'C' 1.5V batteries in this
appliance.
Be sure to insert correctly taking
care to observe the correct
polarity (+ and -).
Use only batteries of the same or
equivalent type as recommended.
Do not recharge non-rechargeable
batteries.
Never mix old and new batteries
(replace all batteries at the same
time).
Never try to dismantle batteries.
Do not short circuit the supply
terminals.
Always remove exhausted or dead
batteries from the product, do not
dispose of in fire.
Remove batteries from the
product before extended storage.
Operation
AC
This unit is supplied with a mains
cable. Fit the AC power cord into the
AC socket (8) of the appliance and plug
into the household socket.
4

Advertisement

Table of Contents
loading

Table of Contents