Configuration And Default Settings; Hardware Default Settings - National Instruments VXIpc 770 Series User Manual

Configuration and Default Settings

Hardware Default Settings

1 CMOS (W5)
2 SCSI Termination Enable (W6)
3 Hard Drive Master/Slave (J20)
© National Instruments Corporation
This chapter summarizes the hardware default settings for the
VXIpc 770/870B Series for easy reference. The module is set at the
factory for the most commonly used configuration.
Figure 3-1 shows the location of the user-configurable jumpers and
switches on the VXIpc 770/870B Series. The diagram also shows the
location of the serial number and assembly numbers.
1 2
4 Automatic Slot Detection (J17)
5 MITE Configuration Enable (W2)
Figure 3-1. VXIpc 770/870B Series Parts Locator Diagram
4
3
6 MITE User Configuration (W1)
7 CLK10 Source Switch (S1)
3-1 VXIpc 770/870B Series User Manual (Online Version)
3
7
6
5