Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for National Instruments NI-9230
Summary of Contents for National Instruments NI-9230
- Page 1 NI-9230 Getting Started 2022-07-06...
-
Page 2: Table Of Contents
Connecting the NI-9230........ -
Page 3: Overview
NI-9230 Getting Started Overview This document explains how to connect to the NI-9230. In this document, the NI-9230 with screw terminal and the NI-9230 with BNC are referred to inclusively as the NI-9230. Note Before you begin, read the NI-9230 Safety, Environmental, and Regulatory Information document on ni.com/manuals... -
Page 4: Safety Guidelines For Hazardous Locations
Safety Guidelines for Hazardous Locations The NI-9230 is suitable for use in Class I, Division 2, Groups A, B, C, D, T4 hazardous locations; Class I, Zone 2, AEx nA IIC T4 Gc and Ex nA IIC T4 Gc hazardous locations;... -
Page 5: Special Conditions For Hazardous Locations Use In Europe And Internationally
II 3G and is suitable for use in Zone 2 hazardous locations, in ambient temperatures of -40 °C ≤ Ta ≤ 70 °C. If you are using the NI-9230 in Gas Group IIC hazardous locations, you must use the device in an NI chassis that has been evaluated as Ex nC IIC T4, Ex IIC T4, Ex nA IIC T4, or Ex nL IIC T4 equipment. -
Page 6: Cable Requirements For Emc Compliance
Furthermore, any changes or modifications to the product not expressly approved by National Instruments could void your authority to operate it under your local regulatory rules. Notice To ensure the specified EMC performance, operate this product only with shielded cables and accessories. -
Page 7: Special Conditions For Marine Applications
In addition, take precautions when designing, selecting, and installing measurement probes and cables to ensure that the desired EMC performance is attained. Preparing the Environment Ensure that the environment in which you are using the NI-9230 meets the following specifications. © National Instruments... -
Page 8: Connecting The Ni-9230
Note You must use 2-wire ferrules to create a secure connection when connecting more than one wire to a single terminal on the NI-9230 with screw terminal. Each channel has a terminal to which you can connect a signal source. The AI+ terminal of the connector provides the DC excitation, when enabled, and the positive input signal connection. -
Page 9: Connecting Signal Sources
You can connect ground-referenced or floating signal sources to the NI-9230. If you make a ground-referenced connection between the signal source and the NI-9230, make sure the voltage on the AI+ and the AI- connections are in the channel-to-earth safety voltage range to ensure proper operation of the NI-9230. -
Page 10: Where To Go Next
NI product. Product registration facilitates technical support and ensures that you receive important information updates from NI corporate headquarters is located at 11500 N Mopac Expwy, Austin, TX, 78759-3504, USA. ni.com © 2022 National Instruments Corporation.
Need help?
Do you have a question about the NI-9230 and is the answer not in the manual?
Questions and answers