Page 3
AP201CWT GPON 1 GE + WiFi ONT Table of Contents 1 Notes ............................5 1.1 Installation Precautions·································································································· 5 1.2 Precautions for Use ········································································································ 5 2 Brief ............................6 2.1 Product Features ············································································································ 6 2.2 Product Specifications ···································································································· 7 2.3 Device Interface Definition ···························································································· 7 2.4 LED Description ··············································································································...
Page 4
AP201CWT GPON 1 GE + WiFi ONT 5.4 Delete the WAN Connection ························································································ 20 6 ONU LAN Configuration ....................... 21 6.1 LAN IP Address Configuration ······················································································ 21 6.2 View LAN Client ············································································································ 22 7 Multicast/IPTV Configuration ....................23 7.1 Multicast/IPTV Service Setting ····················································································· 23 7.2 IGMP Snooping Setting ································································································...
Page 5
AP201CWT GPON 1 GE + WiFi ONT Do not place the equipment near flammable or conductive items, high temperatures (such as direct sunlight) or in wet conditions, or on a PC chassis, and check that the surrounding appliances are stable.
Page 6
AP201CWT GPON 1 GE + WiFi ONT Ascent GPON ONU series (HGU) is GPON ONT for satisfying with Telecom, Radio and Television, and Fiber To The Home (FTTH) multi service access. It’s based on the mature, stable, high cost performance GPON technology and has Gigabit and Fast Ethernet switching HFC technology, WLAN technology and powerful routing forwarding technology.
Page 7
AP201CWT GPON 1 GE + WiFi ONT Ambient temperature: 0°C to 50°C Relative humidity: 10% to 90% (non-condensing) Power adapter input: 12 V/1A TX Optical Power: 0 dBm to 5 dBm RX Optical Power: -8 dBm to -28 dBm Solutions Provider for FTTx, RFoG and HFC www. ascentcomtec.com...
Page 8
AP201CWT GPON 1 GE + WiFi ONT Indicator Description Power status On: The ONU is power on Off: The ONU is power off CATV CATV port status On: CATV optical normal(> -9 dBm) Off: The CATV signals are not received (< -9 dBm)
Page 9
AP201CWT GPON 1 GE + WiFi ONT 1. Local NIC of PC connects to LAN port or ETH port of ONU via wires. 2. Set the IP address of PC’s local NIC as 192.168.101.X (X: 2-254). Solutions Provider for FTTx, RFoG and HFC www. ascentcomtec.com...
Page 10
AP201CWT GPON 1 GE + WiFi ONT 3. Open cmd windows and make sure that PC can ping the management IP (192.168.101.1) of ONU. Make sure you can ping the ONU like #3.1. Open a web browser (such as IE, Firefox, or Chrome), copy and paste the URL: http://192.168.101.1...
Page 11
AP201CWT GPON 1 GE + WiFi ONT Click the “Login” button. The product basics page appears, as follows: You can start further configuration. Login ONU WEB, select Status -> Internet Info -> GPON Info, view the ONU register status: Login ONU WEB, select Status -> Internet Info -> GPON Info, view Rx power and Tx power of ONU: Solutions Provider for FTTx, RFoG and HFC www.
Page 12
AP201CWT GPON 1 GE + WiFi ONT LOID of ONU is mainly applicable of the authentication mode of LOID and LOID + Password for ONU. By default, ONU registers for the OLT by SN and rarely uses LOID for register. Normally, we needn’t to configure LOID.
Page 13
AP201CWT GPON 1 GE + WiFi ONT not manually set the static IP address. It is used as a relay device and does not process the data. There are three ways to obtain the IP address of the user side device, namely DHCP, PPPoE, and Static IP Address.
Page 14
AP201CWT GPON 1 GE + WiFi ONT After configuring the parameters of PPPoE WAN connection as above, click ‘Apply’ to finish the setting: Solutions Provider for FTTx, RFoG and HFC www. ascentcomtec.com Page 14 of 32...
Page 15
AP201CWT GPON 1 GE + WiFi ONT Login ONU WEB, select Internet -> Internet Config -> Internet Config, and then there are some parameters for us to configure as follows: 【WAN Connection name】Select ‘Add WAN Connection’ 【Mode】Select ‘Route’. 【Connection Mode】Select ‘Ipv4’; If there is Ipv6 in the network, we can select ‘Ipv4/Ipv6’.
Page 16
AP201CWT GPON 1 GE + WiFi ONT After configuring the parameters of DHCP WAN connection as belows, click ‘Apply’ to finish the setting: Solutions Provider for FTTx, RFoG and HFC www. ascentcomtec.com Page 16 of 32...
Page 17
AP201CWT GPON 1 GE + WiFi ONT Login ONU WEB, select Internet -> Internet Config -> Internet Config, and then there are some parameters for us to configure as follows: 【WAN Connection name】Select ‘Add WAN Connection’ 【Mode】Select ‘Route’ 【Connection Mode】Select ‘Ipv4’; If there is Ipv6 in the network, we can select ‘ Ipv4/Ipv6 ’.
Page 18
AP201CWT GPON 1 GE + WiFi ONT After configuring the parameters of Static IP WAN connection as below, click ‘Apply’ to finish the setting: Solutions Provider for FTTx, RFoG and HFC www. ascentcomtec.com Page 18 of 32...
Page 19
AP201CWT GPON 1 GE + WiFi ONT Login ONU WEB, select Internet -> Internet Config -> Internet Config, and then there are some parameter for us to configure as follows: 【WAN Connection name】Select ‘Add WAN Connection’ 【Mode】Select ‘Bridge’ 【Connection Mode】Select ‘Ipv4’; If there is Ipv6 in the network, we can select ‘Ipv4/Ipv6’.
Page 20
AP201CWT GPON 1 GE + WiFi ONT After configuring the parameter of Bridge WAN connection as above, click ‘Apply’ to finish the setting: Login ONU WEB, select Status -> Internet Info -> IPv4 Status. In here, we can view WAN connection status, check the route WAN connection if it gets an IP address and Bridge WAN connection if it is UP.
Page 21
AP201CWT GPON 1 GE + WiFi ONT Login ONU WEB, select Internet -> DHCP Server -> IPv4 DHCP Server, and then there are some parameters for us to configure as follows: 【IP address】Set local management IP address of ONU. The default IP address is 192.168.101.1...
Page 22
AP201CWT GPON 1 GE + WiFi ONT After configuring the parameters of LAN address as above, click ‘Apply’ to finish the setting: Login ONU WEB, select Status -> LAN & WLAN -> WLAN Status. View client that access via wireless (WIFI). As follows: Login ONU WEB, select Status ->...
Page 23
AP201CWT GPON 1 GE + WiFi ONT Firstly, configure a bridge WAN connection to carry IGMP/IPTV service according to #6.2 and select ‘Other’ in service mode. After configuring the bridge WAN connection, The configuration, related to other multicast protocols and multicast VLAN, can refer to the following # 7.2- # 7.3 configuration.
Page 24
AP201CWT GPON 1 GE + WiFi ONT Login ONU WEB, select Application -> IGMP Config -> IGMP Proxy. Enable or disable IGMP Proxy function and click ‘Save’ button to finish the setting as follows: Normally, IGMP Proxy would be used in route mode and carrying Multicast/IPTV service, because the ONU would be acted as multicast agent.
Page 25
AP201CWT GPON 1 GE + WiFi ONT Login ONU WEB, select Internet->WLAN Config->WLAN Config, and then there are some parameters for us to configure as follows: 【Enable wireless】Enable or disable the wireless function. 【Virtual SSID】Click ‘Virtual SSID’ button to enter the virtual SSID config page.
Page 26
AP201CWT GPON 1 GE + WiFi ONT After setting wireless password configuration, click ‘Save/Apply’ button to finish setting. Login ONU WEB, select Internet->WLAN Config->WLAN Config, and then click ‘Virtual SSID’ button to enter ‘Virtual SSID’ page. We can enable some of virtual SSID, set band and name them: After setting wireless password configuration, click ‘Save/Apply’...
Page 27
AP201CWT GPON 1 GE + WiFi ONT CATV management is mainly applied to ONU with light machine, we need to configure the ONU optical machine parameters through the ONU’s WEB. Select Management->CATV conifg->CATV config. In this page, we can enable or disable CATV port and configure the parameters according to your requirement.
Page 28
AP201CWT GPON 1 GE + WiFi ONT ONU TR069 remote management is mainly used for some network that support TR069 server centralized remote management, the current management is mainly used in many large networks, ONU as TR069 remote management of the client need to do the following settings.
Page 29
AP201CWT GPON 1 GE + WiFi ONT Login the ONU WEB, select Management -> Wan Access Control -> Wan Access Control. In this page, we can enable or disable the ping remote access and WEB remote access of ONU. Login the ONU WEB. Select Management -> Device -> Restore ONU. Click ‘Restore Default Setting’...
Page 30
AP201CWT GPON 1 GE + WiFi ONT Restore Setting on the ONU WEB is take effect to WIFI information of ONU and LAN port configuration only. It doesn’t take any effect to WAN connection. Note Login the ONU WEB. Select Management -> Firmware Upgrade -> Firmware Update. Click ‘选择文件’...
Page 31
AP201CWT GPON 1 GE + WiFi ONT Login the ONU WEB. Select Management ->Device->Device Reboot. Click ‘Save/Restart’. Restart the device immediately after application. Solutions Provider for FTTx, RFoG and HFC www. ascentcomtec.com Page 31 of 32...
Need help?
Do you have a question about the AP201CWT and is the answer not in the manual?
Questions and answers