Bosch KAI90 Series Instructions For Use And Installation page 32

en
If the appliance is exactly level but one of the doors is
lower than the other:
1. Open the appliance doors.
2. Unscrew the 3 screws holding the base panel and
remove it.
3. Undo the nut.
4. Turn the adjusting nut until the appliance doors are
aligned.
5. If the freezer compartment door is lower: Turn the
adjusting nut anti-clockwise.
6. If the fridge compartment door is lower: Turn the
adjusting nut clockwise.
7. Tighten the nut.
8. Put the base panel back in place and secure it with
the 3 screws.
32
Note
If the door gap at the top and at the bottom is not
identical:
1. Unscrew 2 screws and remove the top hinged
cover.
2. Slacken the hinge screw.
Do not unscrew the screw completely!
3. Adjust the fridge compartment door's vertical
alignment.
4. Tighten the hinge screw.
5. Apply the hinged cover and fasten with 2 screws.