Displaying The Setup Screen; Selecting From The Setup Screen - Universal Remote Control URC Professional Line MX900 Owner's Manual

Displaying the Setup Screen

You can adjust the settings of the Genesis whenever you
like by pressing and holding both the WATCH and the
ENTER button at the same time for three seconds. When
you do, the screen will change to the SETUP screen. If
you do not press any button on the SETUP screen within
30 seconds, the Genesis will time out and automatically
return to normal operation. You can return to normal
operation before that by pressing either the WATCH or
the LISTEN button.

Selecting from the Setup Screen

Simply touch the button for the setting you'd like to adjust:
SETUP
LCD
LIGHT
SOUND
SYSTEM
VERSION
G
ENESIS
At the same time, press and
hold both the WATCH but-
ton and the ENTER button.
When the SETUP screen
appears, you can release the
two buttons.
O M
WNERS ANUAL
LCD - The appearance of the
screen.
LIGHT - What the LIGHT button
does.
SOUND - The volume of the
beeps.
SYSTEM - The battery low warn-
ing.
VERSION - No adjustments are
possible. Displays factory info.
Page 7