Download Print this page

Viatek RENU-IT PRO Series Directions For Use page 2

Professional grade disposable battery regenerator
Hide thumbs Also See for RENU-IT PRO Series:

Advertisement

USING THE RENU-IT PRO
NOTE: Only one battery chemistry can be charged at one time.
STEP 1: Connect the AC adaptor to the power.
STEP 2: Insert the AC adaptor plug into the DC socket
STEP 3: Select the correct battery chemistry, Ni-Cd, Ni-MH or alkaline
STEP 4: Insert the batteries into the charger, aligning each with the correct
polarity.
STEP 5: After inserting the batteries the LEDs will flash for approximately 2
seconds, then Renu-It Pro will automatically detect the status of the
and indicate the status on the LED screen.
STEP 6: The LCD will display "DIS" as it begins to discharge the battery, LED
will light orange at the same time. When the discharging process is
done, the battery will transfer to charge status automatically, and
LCD display "CHA" , LED will light red at the same time. When the
battery is fully charged, the LCD will display "OK" , battery bar on LCD
display a full battery shape, and LED will light green.
NOTE: Ni-MH and Alkaline batteries do not have memory; The Renu-It Pro
will automatically start to charge, (LCD display "CHA")
viatekproducts.com
888-7VIATEK
ADDITIONAL INFORMATION
The Renu-It Pro can only charge is only
Ni-Cd (Nickel Cadmium) and the
Ni-MH (Nickel Metal Hydride) and
alkaline battery.
Don't use extension cable for connection of the device.
Pay attention to the correct polarity during
inserting battery.
Store at room temperature. Extreme temperatures can
damage the unit.
Clean the dust before using to ensure a good connection.
Don't use damaged or corroded battery into the charger.
300 mAh batteries can never be charged over 0.5 hours.
viatekproducts.com
888-7VIATEK
3
407.248.0123
5
407.248.0123
CHARGING TIMES
Charging time is different according to different brand and capacity of
the battery, the formula below can be applied for reference.
x
Battery capacity
1.4 = charging time
B attery Type
B attery size
A A A
A A
N i-C d
C
D
A A A
A A
N i-M H
C
D
A A A
A A
A lkaline
C
D
9V block
viatekproducts.com
888-7VIATEK
B attery capacity
C harge time
400mA h
0.7H
800mA h
1.4H
2200mA h
3.9H
4400mA h
7.7H
800mA h
1.4H
2300mA h
4H
3300mA h
5-8H
5000mA h
8H
1.5V
<1.4V 2.5H
1.5V
<1.4V 5H
1.5V
<1.4V 6H
1.5V
<1.4V 10H
200mA h
7H
407.248.0123
4

Advertisement

loading

Related Products for Viatek RENU-IT PRO Series