Part List; Assembly Instructions - Power Dynamics 180.043 Instruction Manual

Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using
the unit in order to benefit fully from all features.
This stand is ideal for DJs, Musicians and lighting designers. It can hold a laptop as wide as 17". It may be used to
support other machinery including mixers, controllers, printers etc. It can be placed on the table or on the case.

PART LIST

Part No. Part Name
1 Bottom plate
2 Right bottom support
3 Plastic knob
4 Rubber wash
5 Right top holder
6 Anti vibration pad
7 Cross rod
8 Width adding piece
9 Top holder
10 Left bottom support
11 M5 screw

ASSEMBLY INSTRUCTIONS

1. Install the stand as per one of the following drawings
2. Tighten the screws and knobs
3. Place the laptop on the stand
4. Do not throw away any of the parts or packaging
Specifications and design are subject to change without prior notice..
ENGLISH
Qty (pcs)
2
1
4
8
1
4
2
4
2
1
4
www.tronios.com
Copyright © 2016 by TRONIOS the Netherlands