1. Manuals
  2. Brands
  3. BlueWalker Manuals
  4. UPS
  5. PowerWalker VFI 1000 TG
  6. Quick manual

BlueWalker PowerWalker VFI 1000 TG Quick Manual

Hide thumbs
1
2
3
4

Advertisement

Table of Contents

ENGLISH
PowerWalker VFI 1000-3000 TG/TB/TGS
I.

Panel Description

II.
Button
Switch
Function
ON/Silence
By pressing the ON-Button continuously for more than 1 second the UPS system is
Button
turned on.
By pressing this Button an acoustic alarm can be deactivated in the battery mode.
By short touch this Button all acoustic alarms can be deactivated in all modes.
By pressing this Button the UPS can do the battery test in the Line mode or ECO
mode or CVCF mode.
OFF
When mains power is normal, the UPS system switches to No output or Bypass
Button
mode by pressing OFF-Button " ", and the inverter is off. At this moment, if Bypass
is enabled, then the output sockets are supplied with voltage via the bypass if the
mains power is available.
By pressing this Button an acoustic alarm can be deactivated in the bypass mode.
Release the UPS from fault mode and EPO status.
Select
The output voltage, frequency, Bypass disable/enable and operating mode in No
Button
output or Bypass mode, Battery Ah, Battery remain time display disable/enable and
Charger current in all mode, could be selected by pressing Select-Button, and
Enter
confirmed by pressing Enter-Button.
Button
III.
Display
Display
Quick Guide
Function
It indicates input voltage/frequency value, which are displayed alternately.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PowerWalker VFI 1000 TG and is the answer not in the manual?

Questions and answers

Related Manuals for BlueWalker PowerWalker VFI 1000 TG

Summary of Contents for BlueWalker PowerWalker VFI 1000 TG

  • Page 1 ENGLISH PowerWalker VFI 1000-3000 TG/TB/TGS Quick Guide Panel Description Button Switch Function ON/Silence By pressing the ON-Button continuously for more than 1 second the UPS system is Button turned on. By pressing this Button an acoustic alarm can be deactivated in the battery mode. By short touch this Button all acoustic alarms can be deactivated in all modes.
  • Page 2 ENGLISH It indicates the input is connected with mains, and the input power is single phase input. It indicates output voltage/frequency value, which are displayed alternately. It Indicates the operating mode or Fault kind or Warning kind or battery remain time, several warning kinds at the same time could be displayed alternately.
  • Page 3 ENGLISH Table ) Fault active Beep continuously Button function active Beep once Operating Modes The different message/string would be displayed on the LCD screen corresponding to their operating modes. If more conditions apply, the string will circulate on the screen. String Description LINE...
  • Page 4 ENGLISH Output Frequency bYPA Bypass Mode (000 = disabled bypass; 001 = enabled bypass) MOdE UPS (normal mode), ECO (high efficiency mode), CVF (converter mode) EbAH External Battery Ah (Power) values 005-300 means 5-300Ah bATT Battery Remaining Time (000 = disabled time display; 001 = enabled) Charging current (value in Ampere) VIII.

This manual is also suitable for:

Powerwalker vfi 1000 tbPowerwalker vfi 1000 tgsPowerwalker vfi 2000 tgPowerwalker vfi 2000 tbPowerwalker vfi 2000 tgsPowerwalker vfi 3000 tg ... Show all

Table of Contents