Wifi - Nice C2 PRO Instructions And Warnings For Installation And Use

Option: Select Active option to choose Ethernet as communication interface.
Retrieve IP mode: The options are static or DHCP.
Get DNS: This field is enable when the option DHCP is selected. The options are auto or
manual.
Device IP: IP address (exclusive address to a device in a TCP/IP network or a group of
networks).
Subnet mask: A subnet mask is a number of 32 bits that masks an IP address and divide it
in network address and host address.
Gateway: IP address of the router.
Press the button M twice to save the configurations and leave the menu.
The icon without the red exclamation, at the top right side, means that the connection
was successful.
2 – WiFi
Option: Select Active option to choose WiFi as communication interface.
ESSID: Network's WiFi name whose the C2Pro will be connected.
IP mode: Static (the configurations will be described in sequence) or DHCP (the
configurations are set automatically by the network).
Get DNS: This field is enable when the option DHCP is selected. The options are auto or
manual.
Device IP: IP address (exclusive address to a device in a TCP/IP network or a group of
networks).
Subnet mask: A subnet mask is a number of 32 bits that masks an IP address and divide it
in network address and host address.
Gateway: IP address of the router.
Choose WiFi: Choose which WiFi network the equipment will be connected.
Choose which network the equipment will be connected and enter the password. Press the
button "Add WiFi" to include the information about the network manually. With success at
the connection, press the button "Done".
English - 68