Installation Instructions - MAGMATIC Prisma Driver 8 User Manual

Table of Contents

Advertisement

I N S T A L L A T I O N I N S T R U C T I O N S
FLAMMABLE MATERIAL WARNING
Keep driver minimum 5.0 feet (1.5m) away from flammable materials and/or pyrotechnics.
ELECTRICAL CONNECTIONS
A qualified electrician should be used for all electrical connections and/or installations.
DO NOT INSTALL THE DRIVER IF YOU ARE NOT QUALIFIED TO DO SO!
Driver MUST be installed following all local, national, and country commercial electrical and
construction codes and regulations.
Before rigging/mounting a single device or multiple interconnected devices for custom
matrix designs to any metal truss/structure or placing the device(s) on any surface, a
professional equipment installer MUST be consulted to determine if the metal
truss/structure or surface is properly certified to safely hold the combined weight of the
device(s), clamps, cables, and accessories.
Ambient operating temperature range is from -4°F (-20°C) to 122°F (50°C).
Do not operate this device when ambient temperature falls outside this range.
Device(s) should be installed in areas outside walking paths, seating areas, or away from
areas were unauthorized personnel might reach the device(s) by hand.
11

Advertisement

Table of Contents
loading

Related Products for MAGMATIC Prisma Driver 8

Table of Contents