Table of Contents
Advertisement
HOW TO ASSEMBLE THE PLATES
1.
Put the plate in at an angle.
2.
Then lock into the slots on both sides.
1. To remove the plate, slide the switch for the bottom plate release.
2. Completely remove the plate from the unit on an angle.
2
2
1
2
3
2
3
1
How to assemble the plate
1. Put the plate with an angle like photo to the
lock on end correctly like red arrow
2. Push the plate to lock enough like yellow
arrow
1. Push the Switch to end, the plate will come out
2. Take out the plate
3. Remove it with new plate
3
Advertisement
Table of Contents
