DOSKO 13-21T-13H Owner's Manual

Gravity feed 4” wood chipper

Advertisement

Quick Links

Operation, Maintenance and Safety Instructions
Important: Read carefully before use. Keep for future reference.
Make sure you completely read and understand this manual before using the chipper for the first
time. If you have any questions, contact your retail or rental dealer or DOSKO Customer Service
at 1-800-822-0295 or 1-763-428-2237.
READ and UNDERSTAND this manual completely before using the chipper! Failure to properly
operate, and maintain this chipper could result in serious injury or death to the operator or bystanders.
All machines have hazards associated with their operation. This chipper has certain special hazards that
you must be aware of. As an operator or owner you have a duty to be aware of these hazards and know
preventive measures to avoid them. In particular, be aware of the following:
x Keep hands and feet away from inlet and discharge openings.
x Do not allow children under the age of 18 or untrained adults to operate.
x Wear eye protection and other personal protection against flying debris.
x Check that the split housing is fastened shut.
x Do not attempt to perform adjustments, declog or clean unit while engine is running.
x Make sure no children or bystanders are within 100' (31 m) of chipping operation.
x Protect cars, windows and other objects within 100' (31 m) from flying debris.
x Be aware of potential for carbon monoxide (CO) poisoning.
x Prevent fires/explosions from fueling by using precautions described.
x Avoid burns from engine by not touching hot exhaust.
x Avoid using in slippery, muddy, wet or icy conditions where falls may occur.
x Only operate this machine in open space (e.g. not close to a wall or other fixed object) and on
a firm, level surface.
These and other hazards in the manual are summarized at the end under "Important Safety Information."
ASSEMBLY REQUIRED:
instructions.
ADD ENGINE OIL & FUEL:
INSPECT COMPONENTS: Closely inspect to make sure no components are missing or damaged.
See the "Receiving Your Unit" section for instructions on whom to contact to report missing or damaged
parts.
Call your dealer or DOSKO Customer Service 1-800-822-0295 or 1-763-428-2237
Owner's Manual
Gravity Feed 4" Wood Chipper
2964050 (Model: 13-21T-13H)
This product requires assembly before use. See "Assembly" section for
Engine is shipped without oil. DO NOT start chipper without first adding oil
Any Questions, Comments, Problems, or Parts Orders
M2964050G.1
MODEL NUMBER: 2964050
SERIAL NUMBER: _____________
WARNING
STOP!
.

Advertisement

Table of Contents
loading

Summary of Contents for DOSKO 13-21T-13H

  • Page 1 Important: Read carefully before use. Keep for future reference. Make sure you completely read and understand this manual before using the chipper for the first time. If you have any questions, contact your retail or rental dealer or DOSKO Customer Service at 1-800-822-0295 or 1-763-428-2237.
  • Page 2 Hazard Signal Word Definitions...
  • Page 3 Summary of Important Safety Information This section provides a summary of the various safety procedures and measures that have been presented throughout the manual. Keep this summary handy and refer to it to refresh your memory about how to safely use your chipper. WARNING Carefully read and make sure you understand the following safety information before using the chipper.
  • Page 4 Summary of Important Safety Information Hot exhaust - fires. Exhaust from engine can be extremely hot and cause fire. Position muffler at least 7’ from combustible objects during operation. Spark Arrestor. Equip engine with a spark arrestor if chipper will be used near any ignitable forest, brush or grassy land.
  • Page 5 Summary of Important Safety Information “Bounceback”. Keep your face and body away from the chipper hopper in the event of accidental bounce back of any material. Slipping/Falling. Operating in slippery, muddy, wet or icy conditions could lead to losing your footing and slipping or falling.
  • Page 6 Special Safety Information on Static Electricity Static electricity and filling gasoline: Static electricity can initiate from ungrounded gasoline tanks or containers, from flowing gasoline, and from persons carrying a static electric charge. Static electricity can explosively ignite gasoline vapors that are present during the fueling process, resulting in serious burns to all nearby persons.

This manual is also suitable for:

2964050

Table of Contents