Download Print this page

DOSKO M2964020C Owner's Manual

Commercial road-towable brush chipper

Advertisement

Quick Links

Operation, Maintenance and Safety Instructions
Commercial Road-Towable Brush Chipper
Make sure you completely read and understand this manual before using the brush chipper for the first
time. If you have any questions, contact your retail or rental dealer or DOSKO Customer Service at 1-
800-822-0295
READ and UNDERSTAND this manual completely before using the chipper! Failure to properly
operate, and maintain this chipper could result in serious injury or death to the operator or bystanders.
All machines have hazards associated with their operation. This brush chipper has certain special
hazards that you must be aware of. As an operator or owner you have a duty to be aware of these
hazards and know preventive measures to avoid them. In particular, be aware of the following:
 Keep hands and feet away from inlet and discharge openings.
 Do not allow children under the age of 18 or untrained adults to operate.
 Wear eye protection and other personal protection against flying debris.
 Check that the chipper hood is secured and locked.
 Do not attempt to perform adjustments, declog or clean unit while engine is running.
 Make sure no children or bystanders are within 100 feet of chipping operation.
 Protect cars, windows and other objects within 100 feet from flying debris.
 Be aware of potential for carbon monoxide (CO) poisoning.
 Prevent fires/explosions from fueling by using precautions described.
 Avoid burns from engine by not touching hot exhaust.
 Avoid using in slippery, muddy, wet or icy conditions where falls may occur.
These and other hazards in the manual and summarized at the end under "Important Safety Information."
ADD ENGINE OIL, FUEL & BATTERY: Your brush chipper comes fully assembled and requires
only that you add engine oil to crankcase, fuel to tank, and a battery.
INSPECT COMPONENTS: Closely inspect to make sure no components are missing or damaged.
See the "Receiving Your Unit" section for instructions on whom to contact to report missing or damaged
parts.
Any Questions, Comments, Problems, or Parts Orders
Call your dealer or DOSKO Customer Service 1-800-822-0295
Owner's Manual
2964020 (510SD-9-30KD)
WARNING
STOP!
1
M2964020C
MODEL NUMBER: 2964020
SERIAL NUMBER: _____________

Advertisement

loading
Need help?

Need help?

Do you have a question about the M2964020C and is the answer not in the manual?

Questions and answers

Summary of Contents for DOSKO M2964020C

  • Page 1 Commercial Road-Towable Brush Chipper 2964020 (510SD-9-30KD) Make sure you completely read and understand this manual before using the brush chipper for the first time. If you have any questions, contact your retail or rental dealer or DOSKO Customer Service at 1- 800-822-0295 WARNING READ and UNDERSTAND this manual completely before using the chipper! Failure to properly operate, and maintain this chipper could result in serious injury or death to the operator or bystanders.
  • Page 2 3/8" x 9" HHCS 785154 Cutting wheel guard 783600 Deflector/Chipper Hood 5/8”-11 x 8" HHCS 1/2”-13 x 1" HHCS 82333 82325 5/8”-11 nyloc nut 1/2” SAE flat washer 82332 82038 1/2” x 2" HHCS 785156 Guard side lock 82327 783543 Dosko decal...
  • Page 3 Parts Explosions - Cutter Wheel Assembly - Rev C Item Part # Description 1/2” x 2-3/4” HHCS 82388 5/8” Class G flange nut 82288 2-1/4”, 4 bolt flange bearing 785905 785898 Spacer, flange bearing 783609 Shaft 783608 Cutting knife 783617 Cutting wheel 1/2”-13 x 2”...
  • Page 4 Parts Explosions - Trailer Assembly - Rev C...
  • Page 5 Parts Explosions - Trailer Assembly - Rev C Item Part # Description 785140 Belt guard cover 783897 Jack 82340 1/2-13 x 8" Socket head CS 82352 5/8-11 x 2" Button head CS 82037 1/2-13 nyloc nut 783815 2.5" x 1.5" black cap, vinyl 779702 Ball coupler, includes fasteners 82286...
  • Page 6 Parts Explosions - Hydraulic / Drive System - Rev C...
  • Page 7 Parts Explosions - Hydraulic / Drive System - Rev C Item Part # Description Item Part # Description 1/2” x 86.5” Hose, 3/4”JIC x 784850 30 hp Kubota engine 783851 3/4”JIC90 fitting 1/2” x 76” Hose, 3/4”JIC x 785389 Muffler 783850 3/4”JIC90 fitting 1/2”...
  • Page 8 Coupler 1/4” x 1/4” x 1” Key 783532 Infeed hopper stop 784168 783533 Control bar 82319 5/16-18 Set screw 1/2” x 86.5” Hose, 3/4” JIC x 785162 Infeed tray 783851 3/4” JIC90 784048 Latch 783543 Dosko decal 785105 510SD decal...

This manual is also suitable for:

2964020510sd-9-30kd