Download Print this page

Steelcase Montage Installation Instructions

Locking tile

Download this manual

Montage

Locking Tile

Flat Tool - ZFTE

Flat Tool - ZFT

If you have a problem, question, or request, call

your local dealer, or Steelcase Line 1 at

888.STEELCASE (888.783.3522)

for immediate action by people who want to help you.

(Outside the U.S.A., Canada, Mexico, Puerto Rico,

and the U.S. Virgin Islands, call: 1.616.247.2500)

Or visit our website: www.steelcase.com

2001 Steelcase Inc.

Grand Rapids, MI 49501

U.S.A.

Page 1 of 5

Printed in U.S.A.

939504726 Rev D

Need help?

Do you have a question about the Montage and is the answer not in the manual?

Page 1 Flat Tool - ZFTE Flat Tool - ZFT If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.3522) for immediate action by people who want to help you. (Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S.
Page 2 Locate and identify the consolidation point tile. Unpack and identify parts: • Locking tile (1) • Lock Bracket (1) • Rivet (4) consolidation point tile lock bracket 4 rivets locking tile Page 2 of 5 939504726 Rev D...
Page 3 Verify that the mounting plate is centered (horizontally) on the frame. Centered Page 3 of 5 939504726 Rev D...
Page 4: Lock Bracket
Install lock bracket to frame by inserting slots on bracket to tabs on the mounting plate. Use a 3/16" drill bit to drill 4 holes on frame which correspond to holes on lock bracket. Use the lock bracket as your drilling guide.
Page 5 Use four (4) rivets to attach lock bracket to frame. NOTE: Install Cable ID Bag to back of locking tile. Install locking tile and turn key to lock. Make sure locking tile is secure both top and bottom. Page 5 of 5 939504726 Rev D...