118 12’ STEEL LOW TRAINING BEAM Assembly Instructions Thank you for purchasing the 118 - 12’ Steel Low Training Beam from our line of Gymnastics equipment. We appreciate your business and value you as a customer. This 12’ Steel Low Training Beam is manufactured of the finest materials and has been thoroughly inspected before leaving our plant.
Page 3
You have received two shipping boxes. One crate contains the 118T – 12’ Steel Low Training Beam Top packed with a Pair of Steel Low Training Beam End Caps. The second shipping carton contains the 118-25 - 12’ Steel Low Training Beam Legs, which are packed complete with mounting hardware.
Page 4
118 12’ STEEL LOW TRAINING BEAM Assembly Instructions 1.2. Assembly Instructions 3. Locate the mounting holes in the underside of the Beam Top. Align these holes with the holes in the mounting plate of the Beam Leg. Reach inside the Beam and insert a bolt through the bottom wall of the Beam Top and the mounting plate.
Page 5
118 12’ STEEL LOW TRAINING BEAM Assembly Instructions 3. SAFETY WARNING Any activity involving motion or height creates the possibility of serious injury including permanent paralysis and even death, from landing or falling on the neck, head, or other parts of the body.
Need help?
Do you have a question about the 118 and is the answer not in the manual?
Questions and answers