Table of Contents
Advertisement
OPERATING INSTRUCTIONS,
1. STOP! Read the safety information on
the previous page.
2. Turn off all electrical power and open the
access door.
3. Turn off the rear burner and set the front
burner to low.
4. Push in gas control (knob 1) slightly and
turn clockwise
KNOB 3
1. PILOT
KNOB 1
NOTE: Knob cannot be turned from "PILOT"
to "OFF" unless knob is pushed in slightly. Do
not force.
5. Wait five (5) minutes to clear out any gas.
Then smell for gas, including near the
floor. If you smell gas, STOP! Follow "B"
in the safety information on the previous
page. If you don't smell gas, go on to the
next step.
1.
Open access door.
2.
Set front burner to Min. and turn off the rear burner by depressing knob and rotating
clockwise
3.
Unplug all electric power (optional blower) if service is to be performed.
4.
Push in gas control knob slightly and turn clockwise
5.
Close access door.
22
LIGHTING INSTRUCTIONS
to "OFF".
3. REAR BURNER
2. FRONT BURNER
TURN OFF GAS TO APPLIANCE
until stop.
CONTINUED
PILOT LOCATION
TOP VIEW OF BURNER ASSEMBLY
6.
Push in the control (knob 1) all the way
and rotate counterclockwise
to "PILOT". The piezo ignitor will light the
pilot as the knob passes "IGN" traveling
to the "PILOT". Continue to hold the
control (knob 1) in for about ten (10)
seconds after the pilot is lit. Release
knob and it should pop back up. Pilot
should remain lit. If it goes out, repeat
steps 4 through 6. If the control (knob 1)
does not pop up when released, stop and
KNOB 2
immediately call your service technician
or gas supplier. If the pilot will not stay lit
after several tries, turn the gas control
(knob 1) to "OFF" and call your service
technician or your gas supplier.
7.
Turn gas control (knob1) counter-
clockwise
8.
Set the front burner (knob 2) to the
desired setting rotating counterclockwise
to MAX. and clockwise
MIN.
9.
Set the rear burner (knob 3) to the desired
setting rotating counterclockwise
to MAX./ ON or MIN.
10. Close access door and turn on electrical
power.
to "ON".
to "OFF". Do not force.
to
Advertisement
Table of Contents
