Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ONV POE31016P
Summary of Contents for ONV POE31016P
- Page 1 USER GUIDE PoE & Optical Transmission Intelligent managed PoE Switch...
-
Page 2: Packing List
Statement Copyright @ 2002-2013 Optical Network Video Technologies (Shenzhen) Co., Ltd All Rights Reserved This document contains proprietary information that is protected by copyright. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written permission of Optical Network Video Technologies (Shenzhen) Co., Ltd. -
Page 3: Product Overview
Product overview Product Introduction ONV Intelligent Ethernet Switch fills in that blank between Unmanaged Switch and Full Managed Switch. Intelligent Ethernet Switch is designed for growing business network who needs to control their network effectively and don’t want to cost more on full layer 2/3 complicated function. The Ethernet switch which is also built in PoE module provi- des an affordable solution of power and data over Cat.5 cable. - Page 4 Technical Structure and Port Description 275mm 275mm 44.5mm 44.5mm 440mm 440mm POWER POWER INPIT:100-240VAC INPIT:100-240VAC Freq:50/60Hz Freq:50/60Hz A: Working LED indicator A: Working LED indicator B:16 Port PoE B:24 Port PoE C/D: Gigabit TP/SFP Combo Port C/D: Gigabit TP/SFP Combo Port E: Local management port E: Local management port F:100-240VAC,50/60Hz...
-
Page 5: Indicator Description
Indicator description: Description Indicator Status Power ON, Normal Power Supply Yellow LED ON Power Indicator: PWR Power OFF or Power failure Abnormal System Working Status Yellow LED ON System Indicator In Reading Program, Restore Factory Settings Yellow LED Blink ( SYSTEM) 1,Non-Network Management, 2, Abnormal WEB Program Working Status Green LED ON Connected... - Page 6 Detailed descriptions for the product model numbers 16-port Series POE switch POE31016P: 16-port 10/100Mbps +2-port 10/100/1000Mbps up-link ( Combo Ethernet port & SFP slots ) switch , No. 1-16 ports support POE , IEEE802.3af, POE port output : 15.4watts , total power : 270watts POE31016P-at: 16-port 10/100Mbps +2-port 10/100/1000Mbps up-link ( Combo Ethernet port &...
-
Page 7: Connection Diagram
Connection Diagram Remark : Via the Web login configuration interface and web page , you can set various configuration including exchange management, port Settings and VLAN Settings, and so on.You can use a web browser (it is recommended to use Internet Explorer 5.0 or above) to operate. All Ethernet ports support web management , default management IP: 192.168.2.1, subnet mask :255.255.255.0, default gateway: 192.168.2.254. - Page 8 Installation guide Connect to RJ45 port 1.Connect one end of RJ45 wire to switch, the other end to other equipment, as Rj45 port shown as the figure on the right; Plug 2.After power on, please check the LED indictor status. If it is on, it shows the link is OK, otherwise, the link is down.