Philio PSK01 Manual

PSK01 Smart Keypad
The PSK01 support Z-Wave
report key status and setup Arm/ Disarm.
This product can be included and operated in any Z-Wave
network with other Z-Wave
manufacturers and/or other applications.
The devices Built-in rechargeable Lithium-ion battery and using
DC 5V(Micro USB) charge.
TM
Multi-Functions Smart Switch to
TM
certified devices from other
Keypad function list
 Multi-Functions Smart Switch to control door lock or other Z-
Wave device
 Wireless 500 series Z-Wave module inside
 Leading Code Function
Invisible Antenna design with good RF range

 Support Security 2 Function
 Beautiful touch panel, changeable white/black color panel
 Built-in rechargeable Lithium-ion battery
 Low battery LED indicator and report to Controller
 Enable and Disable button (programmed with sensors)
 Support 30 sets of user code to unlock door
 Green and Red LED Indicator on the periphery
 Blue and Green LED Indicator on the buttons
 Long Battery life up to six months
Starting up the device for the first time
TM
The device can not work normally at the first time.Please provide
a 5 DVC voltage through Micro USB Port to wake the device up
before the first using.After the device is activated by connecting
to micro USB, the device will start charging and LED will light on
with red color. If the battery is full charged, LED will light on with
orange color.
1