Grizzly G0923 Owner's Manual page 30

Stopping Print
1.
During printing, press control dial to open
print menu (see Figure 32).
Figure 32. Print menu.
2.
Select "Stop print and save." Stop menu will
open (see Figure 33).
Figure 33. Stop menu.
— Select "Main" to return to print screen and
cancel stop.
— Select "Stop print and save" to stop print.
Z-axis will raise, X and Y axes will home,
then printer will stop. Print location is saved
on SD card as file called "GRIZZLY.G."
Printer can be powered off at this time.
3.
Restart printing by starting a print normally
(see Starting Print on Page 27). Instead of
.GCODE file, choose GRIZZLY.G file. Printer
will resume printing from last position.
-28-
Changing Print Settings
Settings can be changed during printing. This
includes nozzle temperature, print speed, and
print head position.
To change print settings:
1. During printing, press control dial to open
print menu (see Figure 34).
Figure 34. Print menu.
2.
Select "Tune." Print settings include:
Speed: Changes speed of printing.
Nozzle: Changes temperature of nozzle.
Fan Speed 1: Changes speed of cooling fan.
Change Filament: Pauses printing and
begins change filament process. Refer to
Changing Filament on Page 29.
Flow: Changes amount of filament extruded.
Babystep X: Changes X-axis position.
Babystep Y: Changes Y-axis position.
Babystep Z: Changes Z-axis position.
Model G0923 (Mfd. Since 05/20)