Network Settings - A2T -55W21K-U Instruction Manual

Basic Operations

Network Settings

1. Select sidebar menu.
2. Select System Settings (cog) icon.
2. Select Network Settings (Wi-Fi) icon.
3. You will now be able to adjust your
wireless, wired network and hotspot
network settings.
Wireless Network
1. Select sidebar menu.
2. Select System Settings (cog) icon.
3. Select Network Settings (Wi-Fi) icon.
4. Select WLAN.
5. Turn on the WiFi Switch.
6. Select your network from the list and
enter your password. You should now
be connected.
Wired Network
1. Connect your network cable to either
of the LAN ports (Rear right underside)
and the other end to your router.
2. Select sidebar menu.
3. Select System Settings (cog) icon.
4. Select Network Settings (Wi-Fi) icon.
5. Select Ethernet.
6. Turn on the Connect Switch.
7. Select DHCP in the IP settings.
8. Click Save to connect to network.
18
(Continued)
Hotspot Network
1. Select sidebar menu.
2. Select System Settings (cog) icon.
3. Select Network Settings (Wi-Fi) icon.
4. Select Hotspot.
5. Turn on the Hotspot Switch.
6. Enter the hotspot name in the textbox.
7. Select the Security type. Aside from
not using a password, you may
select WPA PSK/WPA2 PSK password
protection. Any connected device will
need a password that is created here to
connect.
8. Click Enter and this network can now be
found by another device.