Table of Contents
Advertisement
Available languages
Available languages
SUNRISE4
9
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
To able to operate the SUNRISE4 with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the SUNRISE4. The other functions of the light effect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
Start address
DMX Address
Next possible start
Next possible start
Next possible start
DMX channels
(example)
occupied
address for unit No. 1
address for unit No. 2
address for unit No. 3
6
33
33-38
39
45
51
DMX Address: 33
DMX Address: 39
DMX Address: 45
DMX Address: 51
............
DMX512 Controller
Example 6 DMX channels configuration
Fig.4
Advertisement
Chapters
Table of Contents
