Download Print this page

Amish Tables Double Pedstal Style Table Assembly Instructions

Assembly Instructions for Double Pedstal Style Table

Table Top

Pedestal Base and Feet

Extensions (if applicable)

1/2" Wrench

Blanket

1.) You ﬁrst need to attach the feet to the

pedestal. Flip the pedestal upside down so

that the bolts on the pedestal are on the ﬂoor.

There should be 2 holes for each leg already

drilled on the pedestal. The necessary

hardware to attach the legs to the base are on

the feet. You can bolt the legs on by reaching

inside the hollow base and securing the legs

with the washer and nut.

Once the legs are attached, rotate the pedestal

so the feet are on the ground.

2.) Slide apart the table top so that the

mounting plate is exposed. Place the table top

on top of the pedestal base so the holes on the

table top line up with the bolts on the

pedestals. Once the top is placed on the

pedestal secure it with the washer and nut.

The necessary hardware is attached to the

pedestal base. Make sure you don't over

tighten the nuts – they only need to be snug.

www.amishtables.com

Table of Contents

Need help?

Do you have a question about the Double Pedstal Style Table and is the answer not in the manual?

Page 1 Assembly Instructions for Double Pedstal Style Table Pieces Tools Needed Table Top 1/2” Wrench Pedestal Base and Feet Blanket Extensions (if applicable) Instructions: 1.) You ﬁrst need to attach the feet to the pedestal. Flip the pedestal upside down so that the bolts on the pedestal are on the ﬂoor.
Page 2 Double Pedestal Instructions, cont. 3.) Open up the table to accept as many extensions as you would like to add. Remember if you are extending it past 4 extensions you will need to use your drop down legs. The drop down legs are attached by a hook underneath the table top.