Corsair HS70 PRO WIRELESS Manual page 3

ENGLISH
CONTENTS, CONTROLS AND FEATURES
A CORSAIR HS70 PRO WIRELESS headset
B Charging cable (USB, 1.8m)
Wireless USB transmitter
C
Wireless sync LED indicator
D
Pairing button (transmitter paired by default)
E
Detachable microphone boom
F
A
B C
D
E
1
G Charging port
H Status LED
Mute button
I
Volume control
J
Power button
K
Headband adjustment
L
F
G
H
K
I
J
GETTING STARTED
Connect the wireless USB transmitter to any working USB port on your PC.
The HS70 PRO WIRELESS headset is designed to operate at a range of up to 40 feet (12m) from the
wireless USB transmitter, but other wireless devices, electronics, and obstructions such as walls may
reduce wireless range.
Important: The first time you use the HS70 PRO WIRELESS headset transmitter on a PC, the operating
system will automatically install the device driver. After the device driver loads, we recommend you
reboot your PC before use.
CHARGING 1
Important: The HS70 PRO WIRELESS headset must be fully charged before its first use.
> Connect the USB charging cable to any working USB port on your PC.
> Connect the USB charging cable to the HS70 PRO WIRELESS headset.
The HS70 PRO WIRELESS headset battery has no "memory effect", so there is no need to completely
discharge it before recharging. The lithium-ion battery in the HS70 PRO WIRELESS headset will last for
hundreds of charge/discharge cycles.
Remember that the USB charging cable requires a high power (USB 2.0 or better) port. Some USB
ports found on older devices do not support USB 2.0.
CHARGING WHILE POWER IS OFF: When the headset is OFF, and CHARGING with a connected USB
cable, the Status LED reports the charge and battery status:
Status LED displays:
AMBER (SOLID): Charging
L
GREEN (SOLID): Fully charged
ENGLISH
2